亚洲五月丁香综合视频

<code id="uu2ah"></code>
    1. <code id="uu2ah"><nobr id="uu2ah"><sub id="uu2ah"></sub></nobr></code><code id="uu2ah"></code><pre id="uu2ah"></pre>
    2. <th id="uu2ah"><video id="uu2ah"><acronym id="uu2ah"></acronym></video></th>
        <tr id="uu2ah"></tr>
      1. <tr id="uu2ah"></tr>
          <tr id="uu2ah"></tr>
        1. SatGen v3 Software History

          Posted in 客戶

          Stock code:
          Version:
          Latest update:

          3.11.26
          11/2018

          3.11.26 - November 2018
          ------------------------
          - SatGen UI: Default signal to noise ratio changed to 4dB below the maximum.
          - SatGen UI Bug Fix: Google Maps was displayed in Developer Mode.
          - SatGen UI Bug Fix: only GPS L1C/A was available with a single constellation dongle plugged in.
          - Optimization: height limit of 2000km is no longer in force, SatGen can now efficiently simulate trajectories even beyond the geostationary orbit.The maximum heights when simulating different constellations are:
                        GPS – 56000 km
                        GLONASS – 57000 km
                        BeiDou – 40400 km
          - Optimization: Racelogic Clock now uses a monospaced font to prevent digits from moving when displaying different values.
          
          
          3.11.19 - September 2018
          ------------------------
          - Optimization: Performance improved by 12%.
          - Bugfix: Wrong ephemeris parameters transmitted by BeiDou geostationary satellites (SV 1 to 5) directly after crossing a BDS week boundary.  
          - Bugfix: Wrong ephemeris was causing very short signal drop-outs every even hour for GPS and every half an hour for GLONASS.
          - Optimization: Newest HASP driver is now included in SatGen Installer.
          - Bugfix: Occasionally (near the BeiDou week boundary) the "toa" (Time of Almanac) parameter in the BeiDou navigation message was wrong.  This had no effect on the position reported by receivers.
          - Bugfix: Most of satellites rising during the simulation had wrong ephemeris and receivers were not able to get a lock.
          - Feature: New EULA for SatGen installer.
          - Optimization: Several changes improving simulation accuracy.
          - Optimization: Simulating highly dynamic trajectories is now much improved. 
          - Bugfix: LabSat 2 Real Time simulations no longer write exceptions to the log file when closing.
          - Feature: Support added for GPS L1P, L2P, L2C, L5I, L5Q, L1M (noise), L2M (noise), GLONASS L2OF and BeiDou B1-2 I, B2I.  All signals can be selected simultaneously for LabSat 3 Wideband with a Wideband dongle plugged in.
          - Optimization: "time left" estimate during simulation is now much more stable and accurate.
          - Feature: SatGen log files now include the simulation engine version.
          - Feature: Any problems experienced when writing output files (such as running out of disk space) are now reported using message boxes. 
          - Feature: Simulation engine prevents the operating system from shutting down until the currently running simulation is fully stopped.
          - Feature: Simulation engine now pops up a message box if an almanac with no satellites is used.
          - Bugfix: Rare crash when running space simulations (satellite visibility issue when flying at orbital speeds and using negative elevation mask).
          - Bugfix: Crash when running extremely short simulations (e.g. 1 second – the minimum permitted simulation length).
          - Bugfix: Crash when no satellites in view.
          - Bugfix: State of the "Satellite number limit" checkbox in RealTime mode was not preserved between sessions.
          - SatGen UI: signal levels for individual constellations now default to their maximum values.  
          - Feature: Negative elevation masks down to -20° are now permitted. 
          - SatGen UI: Acquisition delay is now disabled for Static simulations. 
          - SatGen UI Bugfix: Crash when attempting to write or create satgenV3.ini file in Program Files when running SatGen from a user (non-administrator) account. 
          
          
          ************IMPORTANT NOTE: SatGen now requires .NET Framework 4.7.2*************
          
          
          3.11.3 - February 2018
          ------------------------
          - Feature: Error message is now displayed when simulation engine detects an invalid almanac file (selected in the SatGen UI).
          - Feature: Error message is now displayed when simulation engine detects an empty trajectory.
          - SatGen UI Bugfix: LabSat 3 Wideband output filename had two dots after being edited manually
          - SatGen UI Bugfix: example scenarios were broken (Square, Figure of Eight)
          - SatGen UI Bugfix: German VBO file issues (comma as a decimal point still present in the nmeaInput.txt file)
          - SatGen UI Bugfix: NMEA file written by SatGen had the East and West swapped
          - SatGen UI Bugfix: if you set the simulation output to NMEA, if the file already existed, it wasn't overwritten
          - SatGen UI Bugfix: the velocity and acceleration values in rawoutput.txt didn't match the units in the header (the values were in cm/s and cm/s2 instead of m/s and m/s2)
          - SatGen UI Bugfix: generated nmeaInput.txt was longer than the defined scenario length, it contained extra samples rounding up to a whole second
          - Bugfix: Problem with reading geoid separation from the configuration file Profile.txt.  It seems NMEA option was not working.
          - Almanac loading routines rewritten.
          - Bugfix: broken LabSat 1 output.  The *.bin files didn't have the LS1 intermediate frequency applied and the resulting signal was unstable.
          - Bugfix: broken LabSat2 RealTime simulation for BeiDou and Glonass.  Only GPS was working correctly.
          
          3.10.7 - November 2017
          ------------------------
          - Bugfix: UI - VBO file import was swapping East with West.
          
          3.10.6 - October 2017
          ------------------------
          - Bugfix: UI - File extension from a cancelled attempt to load a KLM or VBO file was displayed when loading an NMEA file.
          - Bugfix: UI - Height command with metres was freezing the software and throwing "Out of Memory" error, validation message now present.
          - Bugfix: UI - Comma was not accepted as a decimal point when loading VBO files.
          - Bugfix: The default almanacs for BeiDou were outdated.  A new almanac has been added "BDS_20170822.alm" and it is automatically selected for simulations starting on 1st July 2016 and after.
          - Bugfix: Output files were sometimes longer than the scheduled simulation time.
          - Bugfix: UI - wrong distance written to the NMEA file when executing the following commands: speed=72@100m wait 4s. One NMEA sample was missing.
          - Bugfix: Wrong GPS L1C/A subframe was transmitted just before midnight on Saturday/Sunday night (GPS week boundary).
          - Feature: Support added for NMEA files with lat/long expressed as fractional degrees.
          - Bugfix: Simulations which were just a few seconds long were crashing.
          - Feature: LabSat 3 Wideband output added. 1, 2 and 3bit quantisation is available for up to 3 constellations at a time in LS3W format.
          - Feature: 2-bit and 3-bit files now use the AGC (Automatic Gain Control) to maintain the optimum level of quantisation.
          - Optimization: Performance improved by 48%. RealTime performance on machines with 2 or more physical processors improved by 68%.
          - Bugfix: Glonass accuracy has been greatly improved (pseudorange residuals dropped from 3-7m to 0.5-2m).  
          - Bugfix: GPS and BDS receivers were losing satellite lock for up to one minute on a week boundary (around midnight on Saturday/Sunday night).
          - Bugfix: Occasional 2-second dropouts of individual satellites starting to occur after 5-6 minutes of simulation.
          - Feature: BeiDou GEO satellites (B1, B2, B3, B4, B5) are now implemented.  Note that they will only be simulated for LabSat 3 Wideband.
          - Feature: Due to performance optimisations the maximum permitted trajectory height is 2000km (1243 miles).  
          - Feature: LabSat2 and LabSat3 files now include the version of SatGen in the file header. LabSat 3 Wideband .ini files now have the SatGen version written to their [notes] section.
          - Bugfix: All output file names were lowercase even if the typed in output names were using Capital Letters.
          - Bugfix: 1-bit RealTime output was broken on all machines.
          - Bugfix: Both 1-bit single constellation RealTime output and 1-bit single constellation files were broken on machines with 2 physical processors.
          - Bugfix: "Link sliders" in RealTime mode was not working if it was already ticked on startup.
          - Feature: Double-clicking a signal level slider in Real Time mode moves it to its maximum value.
          
          3.8.4 - August 2016
          ------------------------
          - Bugfix: UI - Fix google maps.
          - Feature: Real Time Simulation implemented. 
          
          3.3.3 - September 2015
          ------------------------
          - Bugfix: 1 bit BDS and GLONASS files not working.
          - Bugfix: unable to create 3 constellation scenarios for LabSat3.
          - Bugfix: LabSat 3 file header broken. 
          - Bugfix: crash when simulating a GPS+BDS LabSat 3 scenario. 
          - Bugfix: all output files (except 3-constellation LabSat 3 files) were suffering from a minor glitch - 1 in 32 output samples on average had wrong value.
          - Bugfix: on some machines the progress bar was occasionally going back and forth.  
          - Bugfix: crash when satellite number 1 was missing from the almanac.
          - Optimization: Cancelling the simulation takes just a few seconds (previously the user had to wait at least 15 seconds).
          - Feature: "Days" box added in the UI to allow simulations longer than 24 hours.
          - UI change: the height of the main window has been reduced which means SatGen can now be run on 1024x768 screens.  
          - Bugfix: setting noise above the default level was still generating default noise.
          - Feature: Added the latest broadcasted almanac for BeiDou: BDS_20150610.alm.  It is automatically selected for simulations starting on 10.06.2015 or later. 
          - Feature: The simulation progress window no longer stays on top of other windows.
          
          3.2.3 - June 2015
          ------------------------
          - Support added for BeiDou simulation. 
          
          3.0.20 - February 2015
          ------------------------
          - Bugfix: LabSat1 output was generating unreadable signal. 
          - Bugfix: "ghost" satellites were appearing when Glonass satellites were manually deleted from the almanac file. 
          
          3.0.19 - February 2015
          ------------------------
          - Bugfix: Elevation mask selected in the UI had no effect on the simulation.
          - Bugfix: No more problems with manually modified almanac files. 
                    - AGL and YUMA almanac files can now be loaded even if individual satellites have been manually deleted.
          		  - GLONASS simulation no longer crashes when satellites are missing from the almanac.
          - Bugfix: UI - fixed Google Maps scripting errors.
          
          3.0.17 - February 2015
          ------------------------
          - Final implementation of GPS leap seconds - added information about the leap second which will be added on 30th June 2015.
          - GLONASS frequency slots are now up to date with recent constellation changes.
          - Front End change: Addition of VTG strings to NMEA output file.
          - Bugfix: resolved LabSat 2 GPS Monitor freezing problem. 
          - Bugfix: problems with SatGen on German operating system.
          - Feature: ability to manually load separate almanacs for different constellations.
          - Feature: 2-bit output available for LabSat 2 and 3 when running a single constellation.
          
          3.0.3 - August 2014
          ------------------------
          - Cosmetic changes to Labsat 3 headers.
          - EGM84 Height geoid Bugfix.
          - Bugfix for demo mode unexpectedly terminating on certain machines.
          - Bugfix to resolve issue with Google Earth creating .KML files with unusable dynamics.
          - SatGen now opens up a folder containing the output file after it has been generated to make it easier for users to locate.
          - Improvements to dongle detection on remote desktop connections.
          - LabSat 1 created scenarios now will allow receivers to obtain GPS lock.
          NOTE: LabSat 3 units will not play back LabSat 2 GLONASS only scenarios. These will need to be converted to Labsat 3 to play on a Labsat 3.  
          
          3.0.2 - July 2014
          ------------------------
          Initial Release.
          

          手冊和數據表

          Posted in 客戶

          請點擊帶綠色背景的條目來展開或閉合其內容。

            

          LabSat 3 Wideband

          LabSat Real-Time

          LabSat 3

          SatGen v2 and v3

          SatGen v3 Wideband Datasheet 09/2018
          SatGen v3 - Online Manual 03/2015
          SatGen v3 Flyer 09/2018

          SatGen v3 模擬軟件旨在搭配 LabSat 模擬器系列產品使用。

          SatGen v3 具有單星座、雙星座或三星座版本。該軟件可生成 GPS L1、Glonass L1 和北斗 B1 RF 信號。

          SatGen v2 Flyer 04/2012
          SatGen v2 Manual - Revision 2.1
          05/2012

          LabSat and LabSat 2

          軟件和固件

          Posted in 客戶

          請點擊帶綠色背景的條目來展開或閉合其內容。

          ?

          LabSat 3 Wideband

            Change Log
          Updated
          LabSat 3 Wideband Firmware (.zip)
          1.0.668 09/2019
          LabSat Scenario Converter 2.4.5 06/2017
          LabSat 3 Extensions Software 1.0.0.30 07/2015

          注意:此固件版本不支持遠程和外部同步 (Telnet & External Sync) 功能。下一固件版本將支持這些功能。

          您如何運行更新?
          1) 單擊“LabSat 3 Wideband 固件”下載壓縮文件。
          2) 解壓縮并提取 .RUF 文件。
          3) 將 .RUF 文件放入 SD 卡的根目錄
          (而非媒體或任何其它文件夾中)。
          4) 啟動 LabSat 3 Wideband 裝置。
          5) 將 SD 卡裝入前面板。

          LabSat 3

            Change Log
          Updated
          LabSat 3 Firmware 01.08b1083 05/2017

          備注:僅裝置序列號為 033353 或更高的 LabSat 客戶方可使用此升級 (v01.05b1033) 啟動 CAN 仲裁。

          裝置序列號低于 033353 且尚未升級的 LabSat 3 客戶(在 2014 年 3 月底之前購買),須將裝置返廠升級。


          若需遠程控制功能的更多信息,請聯系我們的經銷商或發送電子郵件至 該 Email 地址已受到反垃圾郵件插件保護。要顯示它需要在瀏覽器中啟用 JavaScript。。

          您如何運行更新?
          1) 單擊“LabSat 3 固件”以下載壓縮文件。
          2) 解壓縮并提取 .UPGRADE 文件。
          3) 將 .UPGRADE 文件放在 SD 卡根目錄內
          (非媒介或任何其他文件夾內)。
          4) 啟動 LabSat 3 裝置。
          5) 將 SD 卡插入前面板。

            Change Log
          Updated
          LabSat 3 PC 通訊驅動程序 6.8.8.0 02/2014

          如果您想在 Windows PC 上用 USB(A 至 B)從 LabSat 傳送 NMEA 輸出的數據,使用前請先安裝 LabSat 通訊驅動程序。

            Change Log
          Updated
          LabSat 3 Extensions Software 1.0.0.30 07/2015
          LabSat 1場景轉換軟件 2.4.1.13 02/2015

          SatGen v3 Software

            Change
          History
          Updated
          SatGen v3 Software
          這是完整版 SatGen 軟件,通常搭配購買軟件時收到的軟件狗 (? ) 運行。如果沒有軟件狗,該軟件僅可運行 120 秒,并僅可生成 GPS 場景。
          3.11.42 12/2019
          SatGen v3 手冊   06/2015
          SatGen v3 宣傳冊   06/2015

          SatGen v3 模擬軟件旨在搭配 LabSat 模擬器系列產品使用。

          SatGen v3 具有單星座、雙星座或三星座版本。該軟件可生成 GPS L1、Glonass L1 和北斗 B1 RF 信號。提供的演示軟件不含相關 USB 安全軟件狗,并且在演示模式中僅可生成 120 秒時長的場景。軟件僅可試用 30 天,此后需要相應的軟件狗才能生成任何場景文件。

          請注意,SatGen v3 模擬軟件要求 64 位 Windows 操作系統,不可安裝于 32 位系統上。

          LabSat 和 LabSat 2

            Change Log
          Updated
          LabSat & LabSat 2 軟件 - Windows 版安裝 2.7.4 11/2014
          LabSat 2 固件 2.0 11/2012
          Racelogic Upgrader - 升級 LabSat 2 必備 1.2b78 12/2014
          LabSat 場景轉換軟件 2.4.1.13 02/2015

          LabSat 2 升級逐步指南

          ?

          亚洲五月丁香综合视频
          <code id="uu2ah"></code>
          1. <code id="uu2ah"><nobr id="uu2ah"><sub id="uu2ah"></sub></nobr></code><code id="uu2ah"></code><pre id="uu2ah"></pre>
          2. <th id="uu2ah"><video id="uu2ah"><acronym id="uu2ah"></acronym></video></th>
              <tr id="uu2ah"></tr>
            1. <tr id="uu2ah"></tr>
                <tr id="uu2ah"></tr>